Schenck process Intecont Tersus Beltweigher User Manual

Operation
INTECONT® Tersus Belt weigher, Instruction Manual
Schenck Process Group
BV-H2464GB, 1234
- 19 -
Reset the totalizing counter
This function must be activated with the P01.12 or P01.13 parameters.
Totals
Reset Totalizer 1 or
Reset Totalizer 2
Call up the function distributor
Select the function
Note:Totalizer 3 cannot be deleted.
Call up the zeroing program
Calibration
>0< Zero Set
Call up the function distributor
Acknowledge event information
Call up other functions such as displaying event information, adjustment, etc. and return from the func-
tion distributor
Enter batch setpoint
EnteringBatch Setpoint.
For beltweigher VWF and loss-in-weight feeder VLW:
A query of the Setpoint of the Feedrate will be first made if Feedrate Setpoint
is set to OP or keyboard mode is active.
……
Key in the numerical value

Schenck process Intecont Tersus Beltweigher Specifications

General

Brand	Schenck process
Model	Intecont Tersus Beltweigher
Category	Control Panel
Language	English