Cable with Terminals
The cables with terminals consist of round braids with secured terminals at both
ends. The cables are secured against twisting at these secured terminals when
detaching / attaching cables.
The cables with terminals are guided by the cable guide of the air bellow drive and at
the cams of the lower frame. The cross tube of the lower frame is brought to a
rotation. Subsequently upper frame and pan head are raised.
The cables are greased at the contact surfaces to cams and cable guide.
( Chapter #11.3.3)
Illustration 13: Cable with terminals
All components of the Cable with Terminals are listed in the Spare Parts – List
( Chapter #17.2.5).
To Next Page
