Improper packaging
Damages
• The pan head must be UPSIDE.
• All components must be INSIDE the packaging.
• Open components (e. g. sockets, hoses) must be protected against ingress of
moisture.
• Fix components inside package, that they cannot slip due to centrifugal forces,
break forces or acceleration forces.
• The package may not be damaged by any load securing (e. g. pressure from belt).
The pantograph is mounted in an appropriate packaging (e.g. wooden crate) in
lowered position with the pan head up.
In order to avoid any damage during transportation no parts of the pantograph should
protrude beyond the packaging.
The pantograph is foiled as a protection against dirt and humidity.
To Next Page
Loading...
