Schunk Bahn- und Industrietechnik GmbH
Disassembly
Electrical current in catenary.
From inside vehicle:
1. Switch off current in catenary.
2. Secure against reset.
3. Ground catenary.
4. Lower pantograph to resting position.
Unexpected pressure of pneumatic system.
5. Switch off compressed air supply.
On vehicle roof:
1. Detach high voltage connections between pantograph and vehicle.
2. Detach pneumatic connections between pantograph and vehicle.
3. Secure pantograph at the transport hooks ( Chapter #7) with proper belt.
4. Detach pantograph from insulators.
Remove tools or loose items from vehicle roof.
No person is allowed under the suspended load.
5. Lift pantograph off vehicle roof.
To Next Page
Loading...
