SCHUNK WBL 22.03 - Illustration 17: EXAMPLE: Base Tube of Lower Frame

Schunk Bahn- und Industrietechnik GmbH
Assembly
SB-038483-EN.docx
42 / 147
Datum: 13.02.2018
SAP.Nr.10901359
Index: -
The base tube of the lower frame must be horizontal. If
necessary, washers have to be placed underneath the
insulators, to act as shims.
Illustration 17: EXAMPLE: Base tube of lower frame
8. Check, if base tube of lower frame is horizontal.
9. Fix screw connections of the insulators.
10. Connect electrical equipment ( Chapter #8.2).
11. Attach pneumatic connections ( Chapter #8.3).
1
SB-035494_RS.idw - Blatt 4 - Rev.-