2. RECEIVING YOUR BRAVO
4.
HANDLING THE
UNIT
Where possible, the packaged product must be handled using suitable mechanical means and
following the instructions shown on the package.
In the case of manual handling, the product must be lifted by two people using the handles cut
in the side of the box.
Once removed from the box, the unit must be lifted by two people and transported on a cart or
other similar device.
WE RECOMMEND THAT THE UNIT BE TRANSPORTED AND ST OR E D A T A
TEMPERATURE NO LOWER THAN 5 °C. PROLONGED EXPOSURE TO
LOW TEMPERATURES COULD DAMAGE THE PRODUCT.
KEEP THE ORIGINAL PACKAGING AND USE IT WHEN THE DEVICE IS TRANSPORTED. USING
DIFFERENT PACKAGING COULD DAMAGE THE PRODUCT DURING SHIPPING.
BEFORE SHIPPING, DRAIN THE DISTILLED WATER AND USED WATER
TANKS, AND ENSURE THE DEVICE HAS BEEN OFF FOR 30 MINUTES
FOLLOWING ITS LAST CYCLE SO THAT THE ALL THE HOT INTERNAL
PARTS WILL HAVE TIME TO COOL.