SciCan Bravo - 6. Configuration; Starting and Entering the Setup Mode; How the Keys Function in Setup Mode

6. CONFIGURATION
18.
6.
CONFIGURATION
Bravo users can configure the device to meet their specific needs. For example, the device's
performance may be adapted on the basis of the type of activity, the type of material to be
sterilized or its frequency of use.
The SETUP program allows selecting from several options that users can activate through an
easy-to-use menu.
NOTE
USE THE SETUP PROGRAM WHEN NECESSARY. A CORRECTLY PERSONALIZED DEVICE
PROVIDES THE BEST PERFORMANCE.
SCICAN CUSTOMER SUPPORT (SEE APPENDIX Z) IS AVAILABLE TO HELP USERS BY
PROVIDING SUGGESTIONS OR ADVICE ON THE BEST WAY TO USE THE OPTIONS IN THE
SETUP PROGRAM.
STARTING AND
ENTERING THE
SETUP MODE
To enter the SETUP mode, hold down the ⇑ key on the control panel for several seconds, until
the display reads “INSERT PASSWORD”. Enter the password “- - - - - - - -“ (8 x )
then press the ↵ key to enter the SETUP mode
INSERT PASSWORD
********
↵ to continue
⇑ to exit
Bravo17
SETUP
↵ to continue
⇑ to exit
NOTE
THE ICON SETUP ON THE DISPLAY WILL LIGHT UP AND STAY ON FOR THE ENTIRE
CONFIGURATION PHASE.
Press the ↵ key to enter the SETUP mode. The screen shows the first-level menu items (see
SETUP flowchart below).
Pressing the ESC key ⇑ quits the SETUP program and takes you back to normal operation
(stand-by mode).
NOTE
THE SETUP PROGRAM CAN ONLY BE STARTED IN S T AN D -BY MODE. IT IS NOT
ACCESSIBLE DURING STERILIZATION OR TEST CYCLES.
HOW THE KEYS
FUNCTION I N
SETUP MODE
In SETUP mode the control panel keys have different functions than in normal mode.
Key
SETUP mode
ENTER key to confirm the selected option or value
Increases the value /scroll down
Decreases the value /scroll up the menu items
ESC key to exit the selected menu option