SEON TH8 - Camera Settings - Menu Options

© 2019 Safe Fleet | All rights reserved | Part #: 700-1123 R4
p. 46
TH8 Installation and Conguration Guide

Camera Settings - Menu Options
Menu Item Description Value [Default]
Ch (logical channel) For IP cameras and RTSP video sources (including companion
DVRs): select a logical channel. The channel number determines
the camera display location in live and playback views (for more
information, see "Live View" on page 26).
For analog cameras: leave at default settings unless you need to
customize camera display locations.
[NA], 1-13
[Physical port #].
1-13
Source Auto-detected resolution () [2MP], 1MP, SD
Type Auto-detected camera model () [CHW8PD],
C3Q9PD, C3W9PD
Title For each camera, enter a name that describes the view it is
recording. For example: "Front", "Step", "Mid", "Rear", "Stop Arm".
For instructions on how to enter text with the mouse, see "Using
On-screen Keyboards" on page 27.
Camera titles display in live views and during playback. For more
information, see "Metadata Details" on page 41.
[Channel01]...
[Channel08]
FPS (channel
speed)
Leave channel speed at the default setting unless you have
special requirements.
This sets the recorded frame rate, per second.
[15 fps.], OFF, 1fps,
5 fps, 7fps, 10
fps, 15fps, 20 fps,
30fps
Qlty (quality) Leave channel quality at the default setting unless you have
special requirements.
Setting 1 is the lowest quality, and 4 is the highest. Increased
quality involves greater storage requirements. The DVR uses
compression technology to extend the amount of video
(recording time) that can be stored.
[3], 1, 2, 3, 4
Resolution Leave channel resolution at the default setting unless you have
special requirements.
This sets the recording resolution (in pixels). Higher resolution
reduces the amount of video (recording time) that can be stored.
SD source:
[720x480],
720x240, 360x240
1MP source:
[1280x720],
640x360, 320x180
2MP source:
[1920x1080]
1280x720, 640x360
Audio Leave ON unless the camera is mounted on the exterior of the
vehicle, or if you have special requirements.
Setting Audio ON enables audio recording for the input channel.
Turn OFF for channels where audio feeds are not required, such
as exterior cameras.
[ON], OFF