SEON TH8 - Speed Settings

© 2019 Safe Fleet | All rights reserved | Part #: 700-1123 R4
p. 64
TH8 Installation and Conguration Guide

Speed Settings
About
This topic describes how to set options for recording vehicle speed data and triggering notications for
excessive speed.
Before you begin...
Power up the DVR with a monitor and USB mouse connected, then right-click in Live view and select
Conguration.
For more information, see "Accessing the On-screen Display" on page 25.
Speed Tab
1. Select Alarm/Signal  Speed to open the tab.
2. Congure speed settings as desired.
For details, see Menu Options, below.
3. Click Back to save settings, then click Back
again to return to the Conguration menu.
Menu Options
Menu Item Description Value [Default]
Speed Units Choose MPH in the US, or KPH in Canada.
The speed display units; the GPS signal is converted to display
speed in the selected units.
[MPH] - Miles per hour,
KPH - Kilometers per hour,
KTS - Knots
Speed Limit Enter a speed limit to trigger notications.
If an Excessive Speed Action is selected, this value triggers a
notication if exceeded by vehicle speed.
[0]
Excessive
Speed
Action
Settings other than OFF trigger the selected action (S1-
S10=Signal, ALM1-ALM4=Alarm, Log=DVR log entry) when the
vehicle exceeds the specied Speed Limit.
[OFF], Log, S1 - S10,
ALM1 - ALM4