© 2019 Safe Fleet | All rights reserved | Part #: 700-1123 R4
p. 75
TH8 Installation and Conguration Guide
Wake on Input, Digital Output
About
This topic describes setting the optional features available in the Alarm/Signal Others tab:
• Wake on Input - triggers the DVR to automatically power up (and optionally start recording).
• Digital Output - sends a signal to an external device upon an Alarm or Video Loss event.
Before you begin...
Power up the DVR with a monitor and USB mouse connected, then right-click in Live view and select
Conguration.
For more information, see "Accessing the On-screen Display" on page 25.
The "Others" Tab
1. Select Alarm/Signal Others to open the tab.
2. Congure settings as desired.
For details, see , below.
3. Click Back to save settings, then click Back
again to return to the Conguration menu.
TIP: Expansion and Adaptor Ports
• Wake on Input utilizes a connection to the DVR through the Signals port, via the Adapter Harness.
• Digital Output sends a signal to the external device through the DVR Expansion port.
For more information see the TH8 Quick Install Guide on the Safe Fleet Community
To Next Page
Loading...
