SEON TH8 - Page 63

© 2019 Safe Fleet | All rights reserved | Part #: 700-1123 R4
p. 63
TH8 Installation and Conguration Guide

G Sensor - Menu Options
Menu Item Description Value [Default]
Axis X - forward/back axis
Y - left/Right axis
Z - vertical axis
Vector - combination of X and Y axes (to capture driver behavior
incidents)
Accident - combination of X and Y axes (higher threshold settings, to
capture vehicle accidents)
n/a
Current The current (live) values measured by the G Sensor (display only) n/a
Threshold Set from 0G to 6.0G. This value congures the threshold level. Any value
beyond the threshold triggers the output, as congured in the Output
eld.
X = [+/- 2.00]
Y = [+/- 2.00]
Z = [+/- 3.00]
V = [+ 3.00]
A = [+ 5.00]
Output If the specied G Sensor threshold value is exceeded, the DVR triggers
the selected output (DVR log entry, Signal, or Alarm).
[OFF], Log, S01-S10,
ALM1-ALM4
Peak Use the observed peak values to rene threshold settings.
Peak values reect detected G Sensor levels for axis, Vector, and
Accident activity.
n/a