MX-2300/2700 N/G SIMULATION 7 – 48
* WARMUP END TIME HH → 1s change by 1 count
The other correction values → 1°C change by 1 count
<Code descriptions in the above list>
43-22
Purpose :Setting
Function (Purpose) : Used to perform L/L (low temperature, low
humidity) correction for the fusing tempera-
ture setting 1 (SIM 43-04) for each paper.
Section :Fusing
Item : Operation
Operation/Procedure
1) When the machine enters Simulation 43-22, the following
screen is displayed. (The current set value is displayed.)
2) Select the set item with [↑] and [↑] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is any item under [↓], an active display is made and
item is shifted.
If there is no item over [↓], the display grays out and the
operation is invalid.
3) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
4) When [OK] button is pressed, the currently entered data are
saved to EEPROM and RAM.
* When [↑], [↑], [COLOR], or [BLACK] key is pressed, the current
set value is saved to EEPROM and RAM.
* Input value: The intercept for the correction value is 50. This is
because the set value is kept as a positive number in case of a
negative setting due to negative correction.
• Set value: Value to be set (–49 to +49)
Input value: Actual input value (1 to 99)
<List of setting parameters>
L WARMUP END
TIME HH
Correction value for
WARMUP end time under
HH environment
1 to 99 50
M HL_UM HEAVY
HH
Correction value for
heavy paper TH_UM set
value under HH
environment
1 to 99 50
N HL_LM HEAVY
HH
Correction value for
heavy paper TH_LM set
value under HH
environment
1 to 99 50
O HL_US HEAVY
HH
Correction value for
heavy paper TH_US set
value under HH
environment
1 to 99 50
P HL_UM OHP HH Correction value for OHP
TH_UM set value under
HH environment
1 to 99 50
Q HL_LM OHP HH Correction value for OHP
TH_LM set value under
HH environment
1 to 99 50
R HL_US OHP HH Correction value for OHP
TH_US set value under
HH environment
1 to 99 50
SHL_UM
ENVELOPE HH
Correction value for
ENVELOPE TH_UM set
value under HH
environment
1 to 99 50
T HL_LM
ENVELOPE HH
Correction value for
ENVELOPE TH_LM set
value under HH
environment
1 to 99 50
UHL_US
ENVELOPE HH
Correction value for
ENVELOPE TH_US set
value under HH
environment
1 to 99 50
V E-STAR HH Correction value for
preheating TH_UM set
value under HH
environment
1 to 99 50
W HL_US E-STAR
HH
Correction value for
preheating TH_US set
value under HH
environment
50
X PRE-JOB HH Correction value for
TH_UM set value when
resetting from preheating
under HH environment
1 to 99 50
TH_UM Fusing upper thermister main
TH_LM Fusing lower thermister main
TH_US Fusing upper thermister sub
HL_UM Heater lamp upper main
HL_LM Heater lamp lower main
HL_US Heater lamp upper sub
Item Item display Content of item
Set
range
Default
value
OK
0
:
A: 45
㧧 HL_UM READY HH
SIMULATION NO.43-21
FUSER TEMP ADJUSTMENT (HH)
45
[1㨪 99]
TEST
B 45
㧧 HL_LM READY HH
C 45
㧧
HL_US READY HH
D 45
㧧 HL_UM PLAIN BW HH
CLOSE
Set value –49 –25 –5 0 +5 +25 +49
Input value 1 25 45 50 55 75 99
Item Display item Item content
Set
range
Default
value
A HL_UM PLAIN
BW DUP LL
Correction value for upper
TH_UM BW plain paper
duplex under LL
environment
1 to 99 60
B HL_LM PLAIN
BW DUP LL
Correction value for lower
TH_LM BW plain paper
duplex under LL
environment
1 to 99 60
C HL_US PLAIN
BW DUP LL
Correction value for upper
TH_US BW plain paper
duplex under LL
environment
1 to 99 60
D PLAIN BW DUP
APP CNT LL
Correction value for BW
plain paper duplex
applicable number of
sheets under LL
environment
1 to 99 50
E HL_UM PLAIN
CL DUP LL
Correction value for upper
TH_UM COLOR plain
paper duplex under LL
environment
1 to 99 60
F HL_LM PLAIN CL
DUP LL
Correction value for upper
TH_LM COLOR plain
paper duplex under LL
environment
1 to 99 60
G HL_US PLAIN CL
DUP LL
Correction value for upper
TH_US COLOR plain
paper duplex under LL
environment
1 to 99 60
To Next Page
Loading...
