EasyManuals Logo

Shimadzu GC-2014 Operation Manual

Shimadzu GC-2014
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
1.1 Features
2
1.1 Features
Performance
Good reproducibility can be obtained even for solvents like acetone, which have large expansion
volumes.
Sensitivity of the FPD (flame photometric detector) has been improved and is now up to 2.5 times better
than that of previous models (GC-14B).
The oven cooling speed is now 1.5 times faster than that of previous models (GC-14B).
Good reproducibility in the analyses can be obtained by using either packed or capillary column.
Operability
The diagnosis function has been improved considerably, displaying various alarm messages.
Equipped with a 240 320 dot, 16-line large LCD; analysis parameters, programs, real time
chromatograms, etc. can be listed on the screen. You can toggle Japanese/English.
Automatic flow controller (AFC) controls all carrier gas flow including for packed column. All you need to
do is to specify the flow rate by key input. The resettability is also excellent.
Response to high speed analysis
Detector signals are digitized to enable high speed analysis.
The high pressure injection mode (standard) enables high speed analysis.
Response to packed column analysis
You can use GC-14B standard parts, such as glass column, SUS column, just as they are.
Cost performance
Its width being 400 mm (same as GC-14B), GC-2014 does not take up much space.

Table of Contents

Other manuals for Shimadzu GC-2014

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shimadzu GC-2014 and is the answer not in the manual?

Shimadzu GC-2014 Specifications

General IconGeneral
TypeGas Chromatograph
DisplayLCD
Maximum Heating Rate120°C/min
Data AcquisitionDigital
Maximum Number of Detectors4
WeightApprox. 45 kg
Carrier GasHelium, Nitrogen, Hydrogen
Detector OptionsFID, TCD, ECD, FPD
Injection PortSplit/Splitless, On-column
Gas ControlElectronic Flow Control (EFC)
Temperature Programming Rate0.1 to 120 °C/min
Power Requirements230 V AC, 50/60 Hz
Detector Temperature RangeUp to 400°C (depending on detector type)

Related product manuals