Shimadzu GC-2014 Operation Manual

23
3.1 Screen operation
3
 Operation when you have multiple choices
When moving cursor to a particular item, appears on the
right of the item. This means that you have 2 or more
selections for that item.
 Example
1
Move the cursor onto the item for which you
need to change the selection.
2
Press , to make the appropriate
selection.
3
When the choice you wish to make appears,
confirm it by pressing .
Your selection will not be recognized if you do not
press .
PF1 PF2 PF3
MONIT SET
COL FUNC
FLOW 7 8 9
ON
OFF
NOTE
To undo your selection, press before pressing
.
If you have already pressed , start from
the procedure 1.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)