Shimadzu GC-2014 Operation Manual

49
3.3 Analysis using capillary column
3
3.3 Analysis using capillary column
 Preparation
When analyzing with capillary column, prepare the following items.
Refer to "2.1 Verifying package" for the part numbers of standard accessories.
The parts with (*) are optional, and not included in standard accessories.
Refer to "4.1 Parts for maintenance" for the part numbers of optional parts.
GC-2014 main body GC-2014 Operation manual GC-2014 Instruction manual
(CD-ROM)
Wrench (6  8) Wrench (10  12) Wrench for glass insert nut
Tweezers Capillary cutter* Microsyringe*

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)