Shimadzu GC-2014 Operation Manual

1.3 Specifications
10
1.3 Specifications
 Column oven
 Temperature program
 Injection port
Item Specification
Dimensions (mm) 250 (W)  360 (H)  175 (D)
Volume (L) 15.8
Temperature range Room temperature + 10C to 400C
50C to 400C (When using liquid carbon dioxide gas.)
Temperature accuracy ±1% (K) (Calibration possible at 0.01C)
Temperature deviation Within 2C (on a 200 mm diameter column holder)
Temperature stability Within ±0.05C
Temperature coefficient 0.01C/C
Range of linear temperature increase 115 V model
30C/min up to 150C
20C/min up to 250C
10C/min up to 380C
7C/min up to 400C
230 V model
60C/min up to 150C
40C/min up to 250C
20C/min up to 380C
15C/min up to 400C
Cooling speed To cool from 300C to 50C, approx. 6 minutes.
Overheat protection Programmable up to 420C
(Also, you have another protection separately: fixed at 500C.)
Item Specification
Program ramps 20 ramps in total (Heating and cooling available)
Setting 0.1C increments
Program rate 250 to 250C/min, 0.01C/min increments
All program total time Maximum 9999.99 minutes
Item Specification
Temperature range Up to 400C
Temperature setting 1C increments
Overheat protection Programmable up to 420C
Injection unit Split/Splitless injection, Packed injection (direct)

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)