EasyManuals Logo

Shimadzu GC-2014 Operation Manual

Shimadzu GC-2014
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Introduction
II
GC Models and Supplied Equipment
The supplied injection ports and detectors vary according to the model of the instrument. The accessories and types of
columns that can be used will also vary depending on the GC model.
The contents of this manual are organized according to the type of columns (packed column, capillary column), etc. Read this
manual carefully before you start GC operation.
Refer to the following table for a list of GC models and the types of equipment supplied with each.
Note) INJ: Injection port FID: Hydrogen flame ionization detector TCD: Thermal conductivity detector
SPL: Split/Splitless injection port
Safety-Related Signal Words
In this operation manual, the following safety-related signal words are used to explain the degree of hazard or
possible damage.
GC Model Type of Injection Port and Detector
GC-2014AF Dual packed INJ + Dual FID
GC-2014AT Dual packed INJ + TCD
GC-2014ATF Dual packed INJ + TCD + Dual FID
GC-2014AFsc SPL + FID
GC-2014AFSPL SPL + Dual packed INJ + Dual FID
GC-2014ATFSPL SPL + Dual packed INJ + Dual FID + TCD
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
serious injury or possibly death.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor
to moderate injury or equipment damage.
NOTE
Emphasizes additional information that is provided to ensure the proper use of this
product.

Table of Contents

Other manuals for Shimadzu GC-2014

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shimadzu GC-2014 and is the answer not in the manual?

Shimadzu GC-2014 Specifications

General IconGeneral
TypeGas Chromatograph
DisplayLCD
Maximum Heating Rate120°C/min
Data AcquisitionDigital
Maximum Number of Detectors4
WeightApprox. 45 kg
Carrier GasHelium, Nitrogen, Hydrogen
Detector OptionsFID, TCD, ECD, FPD
Injection PortSplit/Splitless, On-column
Gas ControlElectronic Flow Control (EFC)
Temperature Programming Rate0.1 to 120 °C/min
Power Requirements230 V AC, 50/60 Hz
Detector Temperature RangeUp to 400°C (depending on detector type)

Related product manuals