Shimadzu GC-2014 Operation Manual

3.1 Screen operation
20
3.1 Screen operation
This section describes how to display main/sub screen, and basic screen operation.
 Displaying main screen
Before analysis, display the main screens to specify parameters or monitor the GC status.
1
Press any one of 10 keys shown in the
figure.
If you press one of these keys, the corresponding
main screen will appear.
The main screen appears.
* This is the screen which appears if you press
key.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)