Shimadzu GC-2014 Operation Manual

15
2.1 Verifying package
2
 Accessories for models equipped with capillary column (GC-2014 Afsc, AFSPL, ATFSPL)
* These are only for models with INJ for packed column (GC-2014 AFSPL, ATFSPL).
** These are only for model without INJ for packed column (GC-2014AFsc).
*** One piece comes with the model without INJ for packed column (GC-2014AFsc), and 4 pieces come with
the models with the INJ (GC-2014AFSPL, ATFSPL).
****One piece comes with the model without INJ for packed column (GC-2014AFsc), and 3 pieces come with
the models with the INJ (GC-2014AFSPL, ATFSPL).
For part numbers prefixed with "S", Shimadzu products are recommended.
 TCD accessories (only for models with TCD)
For part numbers prefixed with "S", Shimadzu products are recommended.
Type Description Part No. Qty
Tools Wrench 6  8
Wrench 10  12
Tweezers, K-23
Wrench for glass insert nut
S086-03003
S086-03047-02
S086-16103-01
S221-46977
2
2
1
1
Parts Injection port column nut
Column nut (with split)
Ferrule adjuster (for SPL)
Ferrule adjuster (for FID)
Column hanger
Detector side adaptor (with purge)
Detector adaptor joint
Graphite ferrule (4 pcs)
Detector side adaptor
Branch tube MM-MF-MF
Branch tube
M-type blank nut (2 pcs)
G-type blank nut (2 pcs)
Glass column joint
Insert ring
SUS column adaptor INJ side
SUS column adaptor DET side
Injection port cover
Chromatopac signal cable (wide range) 115 V
230 V
Jet for FID (for capillary column)
S221-16325-01
S221-32705
S221-41532-91
S221-41532-98
S221-70200
S221-34012-91
S221-15561-92
S221-15563-91
S221-33193-91
S201-48386
S221-09688-91
S221-35566-91
S221-35566-92
S221-15561-91
S221-15858-84
S221-14087-91
S221-08882-91
S221-43597-01
S221-47251-41
S221-47251-43
S221-70162-92
1
1
1
1
1
1
*
1
*
1
*
1
**
1
***
1
**
1
1
4
*
2
*
2
*
2
*
1
****
1
1
*
Consumables Fluoride rubber O-ring, for glass insert
Glass insert, for split
Glass insert, for splitless/WBI
Graphite ferrule 0.5, for capillary (10 pcs)
Aluminum gasket (100 pcs)
Silicon rubber gasket (50 pcs)
Silicon rubber septum (20 pcs)
Glass wool (2 g)
Silicon O-ring (20 pcs)
Glass insert (3.2 mm)
S036-11203-84
S221-41444
S221-48335-01
S221-32126-05
S201-35183-84
S201-35184
S201-35584
S221-48600
S201-47614
S221-14093
1
1
1
1
1
1
*
1
1
1
*
2
*
Type Description Part No. Qty
Parts Column connection parts for TCD
SUS column adaptor for TCD
Pipe MN2-GM2 (200 mm)
CAUTION label
S221-10078-92
S221-10079-93
S201-48563-20
201-48298
2
2
1
1
Consumables Graphite ferrule for TCD (10 pcs) S221-10076-91
1

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)