Shimadzu GC-2014 Operation Manual

67
3.3 Analysis using capillary column
3
3
Specify column and flow rate.
(1) Press [Column] (PF1 key).
Specify the following on [Column] screen.
• Column i.d. (internal diameter)
• Column length
• Film thickness
(2) Press key.
Specify the following parameters on the [FLOW]
key main screen.
• Inlet pressure
• Split ratio
• Split mode
NOTE
Even though you have specified column flow rate
beforehand, by changing COL temperature, the flow rate
is also modified.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)