Shimadzu LC-10 User Manual

Shimadzu LC-10/20 System 4 Using the control module
Min. Pressure
Sets the minimum pressure for the given pump. When pressure drops to
the set value, the pump will shut down. This prevents the solvent leakage.
Max. Pressure
Sets the maximum pressure for the given pump. When pressure reaches
the set value, all pumps on the Instrument will shut down. This serves to
prevent the damage to the pump when the column is blocked.
Note: Min. Pressure and Max. Pressure for the Shimadzu LC-10/20 pumps
vary in certain range according to the type of the pump and valves used.
Check the device manual for valid values for your pump.
Solvent 1 (..4)
It is possible to enable/disable particular solvent, as well as to set custom
name to it.
- 22 -

Shimadzu LC-10 Specifications

General

Brand	Shimadzu
Model	LC-10
Category	Laboratory Equipment
Language	English