Shimadzu LC-10 User Manual

Shimadzu LC-10/20 System 4 Using the control module
4.3.5 Device Monitor - Shimadzu LC-10/20 System
The Device Monitor window can be invoked by the Monitor - Device
Monitor command from the Instrument window or using the Device
Monitor icon. It displays the actual cooler temperature (if configured)
and allows to perform the Purge and Rinse actions.
Fig 42: Device Monitor - Autosampler
Purge
Runs the Purge operation according to the settings in the Method Setup -
AS - Sampler dialog.
Rinse
Rinses the syringe according to the settings in the Method Setup - AS -
Sampler dialog.
Cooler Temp.
Displays the temperature of the cooler. Only available when the
autosampler is equipped with the sample cooling unit and the Sample
Cooler Installed checkbox is checked in the Shimadzu LC-10/20 System
Setup - Autosampler dialog.
- 56 -

Shimadzu LC-10 Specifications

General

Brand	Shimadzu
Model	LC-10
Category	Laboratory Equipment
Language	English