Shimadzu LC-10 User Manual

Shimadzu LC-10/20 System 3 Installation Procedure
3.4 Shimadzu LC-10/20 System Setup
Shimadzu LC-10/20 Pump Setup dialog (accessible through the System
Configuration dialog) is used to set the connection to the Shimadzu LC-
10/20 System , select it's configuration and set some other basic
parameters. The Setup tab is always opened by default.
Digital Input Names
Pressing the Change button opens the Digital Input Names dialog which
allows to set the custom name for the virtual Shimadzu LC-10/20 System
digital input. This input allows to start Clarity run by the signal of the
Shimadzu LC-10/20 System controller.
Fig 5: Digital Input Names
- 11 -

Shimadzu LC-10 Specifications

General

Brand	Shimadzu
Model	LC-10
Category	Laboratory Equipment
Language	English