SICK DL100 Pro - PROFINET IO High Feature - Page 92

PROFINET IO-interface
92 © SICK AG • Subject to change without notice • 8021823/126P/2018-12-17
Module parameter "MF2"
(continued)
Name Description
[MF2 Service]
Laser Warning
The output switches when the laser module emits a warning.
Value range
• O
• On
Standard value
• On
[MF2 Service]
Level Warning
The output switches when the level is just within the
permissible range.
Value range
• O
• On
Standard value
• On
[MF1 Service]
Temp. Warning
The output switches when the device temperature is within the
threshold range.
Value range
• O
• On
Standard value
• On
[MF1 Service]
Plausib.
Warning
The output switches when the probability is high that the
measured value is not plausible.
Value range
• O
• On
Standard value
• On
[MF1 Service]
Not Ready
The output switches when the device is not ready.
Value range
• O
• On
Standard value
• On
[MF2 Service]
Heating Status
The output switches when the device heating is on.
Value range
• O
• On
Standard value
• On