EasyManuals Logo

SICK VMS4100 User Manual

SICK VMS4100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2 FOR YOUR SAFETY
10
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
2.4 Sources of danger
The 2D LiDAR sensor of the VMS4100/5100 uses a class 2 laser.
The human eye is not at risk when briefly exposed to the radiation for up to 0.25 seconds.
Exposure to the laser beam for longer periods of time may cause damage to the retina.
The laser radiation is harmless to human skin.
Never look directly into the laser beam.
Never point the laser beam at people’s eyes.
During commissioning or maintenance work, suitable eye protection must be worn.
Avoid laser beam reflection caused by reflective surfaces. In particular during mounting
and alignment work.
Do not open the housing.
Current national regulations regarding laser protection must be observed.
Touching live devices, which may still be energized, can lead to death, burns or electrical
shock.
Electrical work may only be performed on the system by qualified specialist personnel.
Before working on electrical components, observe the five safety rules:
Disconnect.
Secure against being switched back on.
Ensure that there is no voltage.
Ground and short-circuit.
Cover or enclose live parts in the vicinity.
Never enter the area under suspended loads.
Pay close attention when lifting loads.
Comply with lifting instructions to prevent injuries and accidents.
Use suitable, undamaged lifting tools.
Wear personal protective equipment (safety helmet, safety shoes).
2.5 Protective devices
The multi-dimensional measurement system is designed in a way that allows for safe
operation. Protective devices reduce potential risks to the maximum possible extent.
Laser protective cover for the LMS4x21 2D LiDAR sensor
2.6 Warranty
No warranty claims will be accepted if:
The safety notes and measures in this document are not observed.
Parts or components of the multi-dimensional measurement system have been
installed, mounted or modified without authorization.
The multi-dimensional measurement system has been altered or modified.
The software has been modified, customized, and/or tampered with without
authorization.
Optical radiation:
Laser class 2
Electrical voltage
Suspended loads

Table of Contents

Other manuals for SICK VMS4100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SICK VMS4100 and is the answer not in the manual?

SICK VMS4100 Specifications

General IconGeneral
BrandSICK
ModelVMS4100
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals