SICK VMS4100

4 MOUNTING
72
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
4.3 Mounting the photoelectric sensor trigger (optional)
Fig. 70: Mounting the object detection photoelectric sensor
Legend
1 Clinch stud. Secures the object detection photoelectric sensor to the
mounting bracket.
2 M5 hexagon screws
▸
Mount the object detection photoelectric sensor on the mounting bracket using
the two M5 hexagon screws.
▸
Secure the photoelectric sensor using the clinch stud.
▸
Align the photoelectric sensor correctly on the reflector. The reflector must be
positioned within the beam path of the object detection photoelectric sensor.
Mounting