5 ELECTRICAL INSTALLATION
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
5 Electrical installation
All electrical work may only be performed by qualified persons.
• Qualified persons have the specialist training, skills, experience and knowledge of
the relevant regulations and standards needed to be able to perform work assigned
to them and to identify and avoid any potential dangers independently.
• Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to detect
and avoid any potential dangers independently.
DANGER!
HAZARDOUS ELECTRICAL VOLTAGE
The system is supplied with line voltage. Risk of electrical shock. Contact will result in
death, burns or shock.
▸
Electrical work may only be performed on the system by qualified specialist
personnel.
▸
Interrupt the voltage supply.
▸
Check residual voltage on the system components.
▸
Use extra caution.
▸
Always connect equipotential bonding (earthing).
▸
Do not disconnect or remove the protective conductor.
▸
The voltage supply must be disconnected when attaching or detaching electrical
connections.
DANGER!
HAZARDOUS ELECTRICAL VOLTAGE
An incorrect supply voltage may result in damage to the device.
▸
Only operate the cabinet with the specified supply voltage.
▸
All connected circuits must be designed as SELV circuits (in accordance with
EN 60950 or ES1 EN 60368-1).
To Next Page
Loading...
Need help?
General
