ELECTRICAL INSTALLATION 5
8026362 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
5.2 Connecting the voltage supply
Fig. 74: Pin assignment of the -X100 terminal block in the cabinet
Terminal Color Signal Function
-X100/1.1 Gray L Line voltage 100…264 V AC / 50…60 Hz
(phase)
-X100/1.4 Blue N Line voltage 100 ... 264 V AC / 50 ... 60 Hz
(neutral conductor)
-X100/1.6 Green-
yellow
PE Protective conductor
Tab. 9: Pin assignment of the -X100 terminal block in the cabinet
NOTE!
▸
Make sure that cables are securely connected.
No visible metal surfaces are permitted on the wires.
▸
Tighten the coupling nuts to provide strain relief on the cabinet. Doing so also
maintains the enclosure rating.
To Next Page
Loading...
