SICK VMS4100 User Manual

5 ELECTRICAL INSTALLATION
84
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
5.7 Connection for the photoelectric sensor trigger (optional)
Fig. 81: Connection for the photoelectric retro-reflective sensor (optional)
Trigger signal
Wire color Terminal Connection
Black X4 INPUT A 1 IN1+
Brown X4 INPUT A 7 24 V
Blue X4 INPUT A 8 GND ISO (X4)
Tab. 16: Connection for the photoelectric sensor trigger (optional)
• If the trigger signal comes from an external source, the switching input can be
connected to the controller in a volt-free manner.
• In this case, the DIP switch S1 must be set to GND_ISO (X4).
• The connection with terminal 7 (24 V) can be omitted.
External
trigger signal

SICK VMS4100 Specifications

General

Brand	SICK
Model	VMS4100
Category	Industrial Equipment
Language	English