3 SYSTEM DESCRIPTION
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
• Central voltage supply for all system components.
• Coordinates all connected sensors and processes the measured values received.
• The SIM2000-2 Prime controller receives the measuring points from the 2D LiDAR
sensor and uses the 2D sections to calculate a three-dimensional model.
• It determines the box volume and dimensional values based on the calculated
3D model.
• The data is sent to the higher-level customer system via the SIM2000-2 Prime
controller in a host telegram with a defined format.
NOTE! In the case of the VMS5100, the measurement results are saved in the
SIM2000-2 Prime controller alibi memory, which is required for legal-for-trade
verification.
Function
To Next Page
Loading...
