3 SYSTEM DESCRIPTION
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
Fig. 31: Configuring the time of the data output
Legend
1 Free-running operating mode: issue as soon as possible after leaving
the scanning line.
2 Triggered operating mode: after a defined distance from X position in
relation to the rear edge of an object.
3 Triggered operating mode: after a defined distance from X position in
relation to the leading edge of an object.
• The output time is configured using SOPAS.
• Issue depends on the triggering mode selected.
Configuring
output times
To Next Page
Loading...
