Siemens 6RA7086-6KS22

Parameter list 05.05
11-2 SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
Range of parameter
numbers
Function
r964 Device identification
r967 - r968 Visualization parameters: Control and status word
P970 - r999 Resetting and storing parameters, list of existing and modified P and r parameters
U005 - U007 Password protection, key/lock mechanism
n009 Processor utilization
n024 - U098 Miscellaneous
U116 - U118 Binector / connector converter for the serial interfaces
n560 - U583 Commutation monitoring
U607 - U608 Setpoint reduction
U616 Definition of the function of inputs and outputs
U619 Definition of the function of the relay output at terminals 109 / 110
U651 - U657 Starting pulse speed controller
U660 - U668 Evaluation of a 4-step master switch for cranes
U690 - n699 Configuration of SCB1 with SCI1
U710 - n739 Configuration of supplementary boards in board locations 2 and 3
U740 - U753 Configuration of the SIMOLINK board
U755 - n770 Configuration of the EB1 expansion board
U773 - n788 Configuration of the EB2 expansion board
U790 - U796 Configuration of the SBP pulse encoder board
U800 - n813 Configuration of paralleling interface
U819 - U835 Parameters for SIMOREG CM (Control Module)
U838 Rated DC current of external field device
U840 Simulation operation
U845 - U909 Parameters for DriveMonitor
U910 Slot deactivation
U911 - n949 Parameters for DriveMonitor
n953 - n959 Parameters for DriveMonitor
U979 Parameter access for experts
n980 - n999 List of existing and modified U and n parameters