01.04 Environmental compatibility
SIEMENS AG 6RX1700-0AD76 16-1
SIMOREG DC Master Operating Instructions
16 Environmental compatibility
Environmental aspects of development
The number of parts has been greatly reduced through the use of highly integrated components
and a modular design of the entire converter series. As a consequence, the power consumed in
the production process is significantly lower.
Particular importance has been attached to reducing the volume, mass and diversity of metal and
plastic parts.
Front components:
PC + ABS Cycoloy GE-Plastics
ABS Novodur Bayer
Plastic components in
converter:
PC Lexan 141-R
PA 6.6
SE1-GFN1 Noryl
Insulation: PC (FR) fl Makrolon or Lexan
Keyboard membrane: Polyester membrane 0.15 mm
Rating plate: Polyester membrane
Flame arresters containing halogen and insulating materials containing silicone have been
replaced by pollutant-free materials on all major components.
Environmental compatibility was an important criterion in the selection of supplied parts.
Environmental aspects of production
Most supplied parts are shipped in reusable packaging. The packaging material itself is recyclable,
consisting mainly of cardboard.
With the exception of the converter housing, surface coating materials have not been applied.
The production process is free of emissions.
Environmental aspects of disposal
The unit features screw and snap-on connections that can be separated easily to dismantle it into
recyclable mechanical components.
The printed circuit boards can be disposed of by thermal processing. The percentage of
components containing dangerous substances is low.
To Next Page
Loading...
