Installation
118/214 Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9
Solid-insulated bar without three-position disconnector
➭ Remove the covers ① . To do this, remove the 6 bolts M8 x 45 (including washer and spring
washer) and nuts M10.
Fig. 129: Removing the covers ①
Fig. 128: Overview of busbar component: Solid-insulated bar
without three-position disconnector
① Solid-insulated bar with integrated pressure ring ( ② )
②
Pressure ring
③
Busbars
④
Busbar housing
To Next Page
