© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Chapter 3—Operation 2/2008
EN–14
How the Buttons Work
The buttons are used to select menu items, display more menu items
in a menu list, and return to previous menus. A menu item appears
over one of the four buttons. Pressing a button selects the menu item
and displays the menu item’s screen. When you have reached the
highest menu level, a black triangle appears beneath the selected
menu item. To return to the previous menu level, press the button
below
1;. To cycle through the menu items in a menu list, press the
button below
###: (see Figure 3–1).
NOTE: Each time you read “press” in this manual, press and release
the appropriate button beneath the menu item. For example, if you
are asked to “Press PHASE,” you would press the button below the
PHASE menu item.
Changing Values
When a value is selected, it flashes to indicate that it can be modified.
A value is changed by doing the following:
• Press + or – to change numbers or scroll through available
options.
• If you are entering more than one number, press <-- to move to
the next number in the sequence.
• To save your changes and move to the next field, press OK.
Menu Overview
The figures below show the menu items of the first two levels of the
meter. Level 1 contains all of the menu items available on the first
screen of the meter. Selecting a Level 1 menu item takes you to the
next screen level containing the Level 2 menu items.
NOTE: The
###: is used to scroll through all menu items on a level.
To Next Page
Loading...
