© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Chapter 4—Metering Capabilities
EN–55
Energy-Per-Shift
The energy-per-shift feature allows the meter to group energy usage
based on three groups: 1st shift, 2nd shift, and 3rd shift. These
groups provide a quick, historical view of energy usage and energy
cost during each shift. All data is stored in nonvolatile memory.
Configuration
The start time of each shift is configured by setting registers using the
display or by using ION Setup. The table below summarizes the
quantities needed to configure energy-per-shift using register
numbers. For ION Setup setup, refer to ION Setup Help.
Table 4–4: Energy-per-shift recorded values
Category Recorded Values
Time Scales
• Today
• Yesterday
• This Week
• Last Week
• This Month
• Last Month
Energy
• Real
• Apparent
Energy Cost
• Today
• Yesterday
• This Week
• Last Week
• This Month
• Last Month
User Configuration
• Meter Reading Date
• Meter Reading Time of Day
• 1st Day of the Week
To Next Page
Loading...
