Siemens ACCESS 9340 - Reset the Accumulated Operating Time

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Chapter 3—Operation 2/2008
EN–34
Reset the Accumulated Operating Time
1. Press
###: until TIMER is visible.
2. Press TIMER.
3. Enter the password (the default is 0000).
4. Press YES to reset the accumulated
operating time and to return to the RESET
MODE screen.
NOTE: The accumulated days, hours, and
minutes of operation are reset to zero
when YES is pressed.

 






PLSD110284