© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Chapter 5—Input/Output Capabilities
EN–69
Analog Outputs
This section describes the analog output capabilities when a
9340-60-I/O2222 is installed on the meter. For technical
specifications and instructions on installing and configuring the
analog outputs on the 9340-60-I/O2222, refer to the instruction
bulletin (PMIM-IOMOD-0208) that ships with the option module.
To set up an analog output, you must first set it up from the display.
From the SUMMARY screen, select MAINT > SETUP > I/O, then
select the appropriate analog output option. Then, define the values
for each analog input using ION Setup. For instructions on setting up
analog
outputs in ION Setup, see the ION Setup online Help.
To Next Page
Loading...
Need help?
General
