Siemens ACCESS 9340 - Set up the VAR;PF Convention; Set up the Lock Resets

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Chapter 3—Operation 2/2008
EN–28
Set Up the VAR/PF Convention
Set Up the Lock Resets
1. Press
###: until PF is visible.
2. Press PF.
3. Select the Var/PF convention: IEEE or
IEC.
4. Press OK.
5. Press
1; until you are asked to save your
changes.
6. Press YES to save the changes.


 

PLSD110209
1. Press ###: until LOCK is visible.
2. Press LOCK.
3. Select Y (yes) or N (no) to enable or
disable resets for PK.DMD, ENERG,
MN/MX, and METER.
4. Press OK.
5. Press
1; until you are asked to save your
changes.
6. Press YES to save the changes.



  








PLSD110200