Siemens ACCESS 9340 - Set up the Alarm Backlight; Set up the Bar Graph

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Chapter 3—Operation
EN–29
Set Up the Alarm Backlight
Set Up the Bar Graph
1. Press
###: until BLINK is visible.
2. Press BLINK.
3. Enter ON or OFF.
4. Press OK.
5. Press
1; until you are asked to save your
changes.
6. Press YES to save the changes.
  


PLSD110215
1. Press ###: until BARGR is visible.
2. Press BARGR.
3. Press AMPS or PWR.
4. Select AUTO or MAN. If MAN is selected,
press OK and enter the %CT*PT and KW
(for PWR) or the %CT and A (for AMPS).
5. Press OK.
6. Press
1; until you are asked to save your
changes.
7. Press YES to save the changes.

 
PLSD110231