Siemens ACCESS 9340 - Set up the Language; Set up Cts

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Chapter 3—Operation 2/2008
EN–20
Set Up the Language
Set Up CTs
1. Press
###: until LANG is visible.
2. Press LANG.
3. Select the language: ENGL (English),
SPAN (Spanish), FREN (French),
GERMN (German), or RUSSN (Russian).
4. Press OK.
5. Press1; until you are asked to save your
changes.
6. Press YES to save the changes.


 


PLSD110103
1. Press ###: until METER is visible.
2. Press METER.
3. Press CT.
4. Enter the PRIM (primary CT) number.
5. Press OK.
6. Enter the SEC. (secondary CT) number.
7. Press OK.
8. Press
1; until you are asked to save your
changes.
9. Press YES to save the changes.


  






PLSD110106