© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Chapter 4—Metering Capabilities
EN–51
• Peak demand—highest demand value since the last reset of the
input pulse demand. The date and time of the peak demand is
also saved.
• Minimum demand—lowest demand value since the last reset of
the input pulse demand. The date and time of the minimum
demand is also saved.
To use the channels feature, first set up the digital inputs from the
display (see “Set Up I/Os” on page 24). Then using ION Setup, you
must set the I/O operating mode to Normal and set up the channels.
The demand method and interval that you select applies to all
channels. See the ION Setup online help for instructions on device
set up of the meter.
To Next Page
Loading...
