Commissioning (software)
5.7 Commissioning modes
Control Units CU240S
Operating Instructions, 11/2006, A5E00766042B AA
5-55
Automatic Download
The automatic download at start-up is controlled via P8458. With the automatic download all
necessary parameters including the parameters regarding fail-safe functions are downloaded
into the inverter.
Note
MMC for "automatic download"
For an automatic download always the file clone00.bin will be used.
The user has to take care, that clone00.bin (saved as "clone00.bin" with STARTER on PC or
via setting P0804 = 00 with the OP) is available on the MMC, used for an automatic
parameter download at start-up. Otherwise automatic download will not be processed.
To Next Page
Loading...
Need help?
General
