Siemens FC300 - Page 288

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.3.2.10.4 2) Lower alarm limit Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[m3] User
2.3.2.10.5 2) Hysteresis Enter the hysteresis to avoid un‐
wanted rapid switching.
0
[m3]
User
2.3.2.10.3) Upper alarm limit Set upper alarm limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[normal m3] User
2.3.2.10.23) Upper warning limit Set upper warning limit. Waning
is triggered if totalizer 2 value is
above the limit.
[normal m3] User
2.3.2.10.33) Lower warning limit Set lower alarm limit. Warning is
triggered if totalizer 2 value is
above the limit.
[normal m3] User
2.3.2.10.4 3) Lower alarm limit Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[normal m3] User
2.3.2.10.5 3) Hysteresis Enter the hysteresis to avoid un‐
wanted rapid switching.
0
[normal m3]
User
1)
Process Value is set to Mass flow
2)
Process Value is set to Volume flow
3)
Process Value is set to Standard volume flow
Table B-9 totalizer 3
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.3.3.1 Process value Select process value for totaliza‐
tion.
Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Fraction A
● Fraction B
User
2.3.3.2 Unit 1) Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
kg Kg, t, STon, T, oz,
lb, Custom
User
2.3.3.2 Unit 2) Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
L L, hl, m³, gal,
i.ga.,bbl31.5,
bbl31, bbl42, in³,
ft³, yd³, bush, Cus‐
tom
User
2.3.3.2 Unit 3) Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
NL Nl, Nm³, SI, Sft³,
Sm³, Custom
User
2.3.3.3 Custom units Define a name for the custom
units. The custom units can then
be selected in the units list.
User
Default settings
B.4 Totalizer
MASS 2100 & FC300 (FCT030)
288 Operating Instructions, 06/2017, A5E39789040-AA