Siemens FC300 - Page 440

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.4.3.1.2 Error status Error status
● Upper
saturation
● Lower
saturation
● Fail-safe
behaviour
avtive
● Cable breal
● Loop current
deviation
Read
only
3.4.3.2 Channel 2 – output
3.4.3.2.1 Operation mode Actual status of the operation
mode
Current output
● Off
● Current output
● Frequency
output
● Pulse output
● Status output
Read
only
3.4.3.2.2 Loop current Actual value of current output. [mA] Read
only
3.4.3.2.2 Digital output signal Actual value of status output. Read
only
3.4.3.2.2 Totalized amount Actual value of totalized amount. [kg] Read
only
3.4.3.2.2 Output frequency Actual value of frequency output. [Hz] Read
only
3.4.3.2.3 Error status Error status - pulse
● Upper
saturation
● Fail-safe
behaiviour
active
Read
only
3.4.3.2.3 Error status Error status - frequency
● Upper
saturation
● Lower
saturation
● Fail-safe
behaiviour
active
Read
only
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
440 Operating Instructions, 06/2017, A5E39789040-AA