Siemens FC300 - Page 448

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.7.5.4.1 Logging value 1 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
For all logging Val‐
ues:
● Disabled
● Mass flow
● Volume flow
● Standard
● Volume flow
● Density
● Reference
● Density
● Medium
temperature
● Mass flow
● Totalizer 1
● Totalizer 2
● Totalizer 3
3.7.5.4.2 Logging value 2 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.3 Logging value 3 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.4 Logging value 4 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.5 Logging value 5 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.6 Logging value 6 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.7 Logging value 7 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.8 Logging value 8 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
448 Operating Instructions, 06/2017, A5E39789040-AA