Siemens FC300 - Page 449

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.7.5.4.9 Logging value 9 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.10 Logging value 10 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.11 Logging value 11 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.12 Logging value 12 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.13 Logging value 13 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.14 Logging value 14 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.15 Logging value 15 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.16 Logging value 16 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.17 Logging value 17 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.18 Logging value 18 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.19 Logging value 19 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.4.20 Logging value 20 Select the process values to be
logged. Up to 20 can be selected
here. With a remote tool you can
configure up to 90.
3.7.5.5 Advanced logging
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 449