Siemens LMS14

448/617
Building Technologies Division User Manual LMS14… CC1U7471en
6 The settings in detail 28.01.2015
Line no. Operating line
Off ¦ On
1330 Summer/winter heating limit
1332 24-hour heating limit
1333 Ext’n 24-hour heating limit
No ¦ Yes
1340 Flow temp setpoint min
1341 Flow temp setpoint max
1342 Flow temp setpoint room stat
1346 Delay heat request
1350 Room influence
1360 Room temp limitation
1361 Heating limit room controller
1370 Boost heating
1380 Quick setback
Off ¦ To Reduced setpoint ¦ To frost Prot setpoint
1390 Optimum start control max
1391 Optimum stop control max
1400 Reduced setp increase start
1401 Reduced setp increase end
1409 Continuous pump operation
No ¦ Yes
1420 Overtemp prot pump circuit
Off ¦ On
1430 Mixing valve boost
1432 Actuator type
2-position ¦ 3-position
1433 Switching differential 2-pos
1434 Actuator running time
1435 Mixing valve Xp
1436 Mixing valve Tn
1450 Floor curing function
Off ¦ Functional heating ¦ Curing heating ¦ Functional/curing heating ¦ Curing/functional heating ¦ Manually
1451 Floor curing setp manually
1461 Excess heat draw
Off ¦ Heating mode ¦ Always
1470 With buffer storage tank
No ¦ Yes
1472 With prim controller/system pump
No ¦ Yes
1480 Pump speed reduction
Operating level ¦ Characteristic ¦ Temp differential nominal
1481 Starting speed
1482 Pump speed min
1483 Pump speed max
1488 Curve readj at 50% speed
1489 Filter time const speed ctrl
1490 Flow setp readj speed ctrl
No ¦ Yes
1498 Operating level changeover
Frost protection ¦ Reduced ¦ Comfort
1500 Optg mode changeover
None ¦ Protection ¦ Reduced ¦ Comfort ¦ Automatic
DHW