Siemens SCALANCE X-300 Series User Manual

11.2 Product group X-300M
11.2.1 Approvals
11.2.1.1 X-300M approvals, certificates
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application Requirements
Emission Immunity to interference
Industry EN 61000-6-4 : 2007 EN 61000-6-2 : 2005
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described is
intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms
with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore no
declaration of conformity relating to the EC Machinery Directive 2006/42/EEC for this product.
Certifications and approvals
11.2 Product group X-300M
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 257

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English