Siemens SCALANCE X-300 Series User Manual

11.8.1.1 ATEX (KEMA 07 ATEX0145 X)
ATEX (explosion protection directive)
WARNING
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
● on the data medium that ships with some devices.
● on the Internet pages of Siemens Industry Online Support (https://
support.industry.siemens.com/cs/ww/en/view/78381013).
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres”. and as of 20.04.2016
the EC directive 2014/34/EU.
ATEX classification:
II 3 G Ex nA IIC T4 Gc
KEMA 07ATEX0145 X
The products meet the requirements of the following standards:
● EN 60079-15 (electrical apparatus for potentially explosive atmospheres; Type of protection
"n")
● EN 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
You will find the current versions of the standards in the currently valid ATEX certificates.
ATEX classification
II 3 (2) G Ex nA [op is Gb] IIC T4 Gc
DEKRA 11 ATEX 0060 X
These products meet the requirements of the standards
● EN 60079-15: 2010
● EN 60079-0:2009
● EN 60079-28: 2007
Note
Only the media modules MM991-2 meet the requirements of this approval.
Certifications and approvals
11.8 MM900 product group
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 291

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English